Minolta SCANNER RX-1 - V2.1.0 Guide de l'utilisateur Page 142

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 286
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 141
Scanning With the Machine130
Specifying the Data Location
Select whether the computer or USB memory device is the location where
scan data is to be saved. When transmitting via a network, refer to “Specify-
ing the Destination Address (Scan to E-mail/FTP/SMB)” on page 132.
" If an address has been specified as the destination for the data, SCAN
TO PC
and SCAN TO USB MEMORY cannot be selected.
Saving Data on a Computer Connected (Scan to PC)
Follow the procedure described below to send scan data to a computer con-
nected to this machine.
" In order to perform this operation, make sure the TWAIN (or WIA)
scanner driver, the printer driver, and LinkMagic (Windows only) have
been installed on your computer.
" Before performing the Scan to PC operation, be sure that either Link-
Magic is activated or the LinkMagic icon appears in the notification
area.
" The scan settings specified with LinkMagic are given priority. Specify
the various settings with LinkMagic. For details, refer to the Reference
Guide on the Documentation CD/DVD.
1 In the main screen, press the + or , key to select the current data desti-
nation setting, and then press the Select key.
2 Press the + or , key to select SCAN TO PC, and then press the Select
key.
" The scan data is saved in the folder specified with LinkMagic. For
details, refer to the Reference Guide on the Documentation CD/DVD.
Saving Data on a USB Memory Device (Scan to USB
Memory)
Follow the procedure described below to save scan data to a USB memory
device plugged into the USB HOST port of this machine.
" This machine is compatible with a USB memory device of 4 GB or
less.
1 Plug the USB memory device into the USB HOST port of this machine.
2 In the main screen, press the + or , key to select the current data desti-
nation setting, and then press the Select key.
Vue de la page 141
1 2 ... 137 138 139 140 141 142 143 144 145 146 147 ... 285 286

Commentaires sur ces manuels

Pas de commentaire