Minolta MAGICOLOR 3300 Guide d'installation télécharger pdf (Page 21)

What’s Next?

English

What’s Next?

You have now completed the hardware setup of your printer. There are four

more important steps:

1 If your language is other than English, refer to “Selecting a Message

Window Language” on page 19. Select the message window language

you prefer.

2 If you are connecting via parallel or USB, skip to step 3. If you are con-

necting via Ethernet, set your IP (Internet Protocol) address.

With DHCP—If your network supports DHCP (Dynamic Host Configura-

tion Protocol), your IP address will be automatically assigned by the

DHCP server when you turn on your printer. (Refer to the Crown Books

on the Documentation CD-ROM for more information.) Go to step 3.

Without DHCP—If you are not using DHCP, you may set the IP address

in one of two ways:

 Use the KONICA MINOLTA installation software. Refer to the User’s

Guide on the Documentation CD-ROM.

 Set the printer’s IP address manually. Refer to “Manually Selecting an

Ethernet IP Address” on page 22.

3 Connect the printer to your computer or a network.

4 Insert the Software Utilities CD-ROM and follow the instructions on the

screen to install a printer driver (or PPD) and printer utilities. There are

several installation options, depending on your host environment:

 Windows—Use the Software Utilities CD-ROM AutoInstaller for the

easiest installation. For more information, refer to the User’s Guide on

the Documentation CD-ROM. If you prefer to install a printer driver (or

PPD) and printer utilities manually, refer to the readme files on the

Software Utilities CD-ROM.

 Macintosh—Use the Software Utilities CD-ROM AutoInstaller to

install PPDs and then, to complete the connection, refer to the User’s

Guide.

 UNIX and Linux—Refer to the readme files on the Software Utilities

CD-ROM.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Pas de commentaire

Minolta MAGICOLOR 3300 Guide d'installation Page 21