Minolta MAGICOLOR 2350 Guide de l'utilisateur télécharger pdf (Page 30)

Media Types28

English

 Remove transparencies as soon as possible from the output tray to

avoid static buildup.

You can print continuously with transparencies. However, this could affect the

way media feeds, depending on the media quality, static buildup, and printing

environment.

Format the information to be printed on the transparencies within your

application. Try printing your data on a plain sheet of paper first to check

placement.

 If you have problems feeding 50 sheets, try loading only 1–10 sheets

at a time. Loading a large number of transparencies at a time may

cause static buildup, thus causing feeding problems.

Use transparencies that

 Are approved by KONICA MINOLTA

 Have as little static electricity as possible

What Is the guaranteed imageable (printable) area?

Each media size has a specific imageable area, the maximum area on which

the printer can print clearly and without distortion.

This area is subject to both hardware limits (the physical media size and the

margins required by the printer) and software constraints (the amount of

memory available for the full-page frame buffer).

Capacity Tray 1 Up to 50 transparencies, depending on their

thickness

Tray 2 Not supported

Orientation Face up

Ty pe Check printer.konicaminolta.net/support

(click on Answer

Base) for currently approved media. To order approved

media, go to www.q-shop.com.

Driver Mode Transparency

Duplexing Not supported

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 207 208

Pas de commentaire

Minolta MAGICOLOR 2350 Guide de l'utilisateur Page 30