Minolta MAGICOLOR 2350 Guide de l'utilisateur télécharger pdf (Page 40)

Duplexing38

English

2 Click Add.

The Optional Duplexer appears in the Installed Options box and duplex

printing options are available in the printer driver and in your application’s

print dialog box.

Macintosh—You can configure the duplex option when you first set up your

printer, or you can add it later to your desktop printer configuration:

1 Select your desktop printer.

2 From the Printing menu, select Change Setup...

3 Select the Optional Duplexer from the Change drop-down list.

4 Select Installed from the To drop-down list.

5 Select OK

When you select File/Print, the Print on Both Sides option is now available

in the Layout dialog box.

Memory Requirements

Your printer comes configured with 128 MB of RAM. Duplex printing can be

done automatically with a duplex option and enough memory installed, and

with the duplex option selected in the printer. Most print jobs will print with 128

MB of RAM, but may not print at the desired resolution.

 You will need at least 192 MB of RAM to print color duplex jobs on letter/

A4-size media at either the PostScript High resolution or the PCL

Enhanced resolution

 You will need at least 256 MB of RAM to print color duplex jobs at

PostScript High or PCL Enhanced resolution on legal-size media.

Additional memory can be added up to a total of 384 MB.

Printing Duplex

 Check your application to determine how to set margins for duplex

printing.

1 To print duplex (both sides of the sheet), load the media printing-side up.

a For Tray 1, load the media with the top of the media toward the back of

the tray.

b For Tray 2, load the media with the top of the media toward the right

side of the tray.

 In autoduplexing, the back side is printed first and the front side is

printed last.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 207 208

Pas de commentaire

Minolta MAGICOLOR 2350 Guide de l'utilisateur Page 40