Minolta Dimage 5 Manuel d'instructions télécharger pdf (Page 9)

1716

GETTING UP AND RUNNING

ATTACHING THE CAMERA STRAP ATTACHING THE LENS HOOD

REMOVING THE LENS CAP

Using your thumb and index fin-

ger, pinch the inside or outside

tabs of the lens cap to remove.

• When the camera is not in use,

always replace the lens cap.

To mount the lens hood, align the rectangular

dimple on the rim of the hood with the focal-

length index on the top of the lens barrel

Slide the hood onto the end of the lens and

turn it 90° clockwise until it clicks and the cir-

cular dimple is aligned with the focal-length

index.

• When mounted correctly, the large petals of the

lens hood should be to the top and bottom.

• Never force the lens hood. If it does not fit,

check its orientation.

• To detach the lens hood, turn it 90°

counterclockwise and remove.

The lens hood can be reverse mounted when the

camera is not is use.

With one of the large petals to the top, slide the hood

onto the end of the lens. Turn it 90° clockwise until it

clicks.

• The lens hood can be attached or removed with the lens

cap on the camera.

• To detach the lens hood, turn it 90° counterclockwise

and remove.

The lens hood is used to control stray light from entering the lens and causing flare.

When using the camera under bright light, the use of the lens hood is recommended.

The lens hood should not be used with the built-in flash as it can cause a shadow.

Attach the camera strap to the strap eyelets as

shown.

• Always keep the camera strap around your neck in the

event that you drop the camera.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 74 75

Pas de commentaire

Minolta Dimage 5 Manuel d'instructions Page 9