Minolta DIMAGE A1 - SOFTWARE Manuel d'instructions télécharger pdf (Page 33)

BASIC RECORDING OPERATION

Place the subject within the focus frame. For off-center

subjects, use the focus-lock function (p. 34).

The subject must be within the focus range of the lens:

0.5m (1.6ft) - ∞. For subjects closer than 0.5m (1.6ft),

use the macro function (p. 49).

Use the zooming ring to frame the subject (1). The

effect of the zoom is immediately displayed in the

viewfinder (EVF) and LCD monitor.

Press the shutter-release button partway down (2) to

lock the focus and exposure.

When the focus is set, an AF sensor will briefly appear

in the live image to indicate the point of focus. The

focus signals (p. 35) on the monitors will confirm that

the image is in focus. If the focus signal is red, the

camera was unable to focus on the subject. Repeat the

previous steps until the signal is white. The shutter

speed and aperture value will change from white to

black indicating the exposure is locked.

Press the shutter-release button all the way down (3) to

take the picture.

The access lamp will glow indicating the image data is

being written to the memory card. Never remove a card

while data is being transferred.

Shutter-speed and aperture

Focus signal

AF sensor

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 48 49

Pas de commentaire

Minolta DIMAGE A1 - SOFTWARE Manuel d'instructions Page 33