Minolta CD-10 Manuel d'instructions télécharger pdf (Page 23)

IBM/Windows

Windows 95

The PCMCIA Card Drive CD-10 connects with the

Adaptec SCSI board. Windows 95 includes its own driver

software, therefore it is not necessary to install additional

driver software. However, when working in DOS mode,

additional driver software is needed - please refer to the fol-

lowing section, "Windows 3.1 and DOS".

Environment

The following computing environment is required:

• SCSI board: AHA-1510B, AHA-1520B,

AHA-1540CP, AHA-1030P,

AHA-2940

PC Cards

Minolta image memory cards are pre-formatted. Unfor-

matted cards should always be formatted in the camera.

NOTE:

• Although it is not recommended, if it is necessary to format PC

cards in the computer, use the AFDISK format.

• IMPORTANT: When using the Minolta RD-175 digital camera

erase all data on the card first, then format the card in the cam-

era. Failure to use this procedure may cause errors. A PC card

that is used with both the RD-175 and the CD-10 should always

be formatted in the camera to avoid errors.

• When using the PC Card Adapter Set disable BIOS on the SCSI

board.

7. Using IBM PC/AT

Compatible Computers

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30

Pas de commentaire

Minolta CD-10 Manuel d'instructions Page 23