Minolta Di183 Manuel de service télécharger pdf (Page 110)

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS

01.07.26

S-22

(8) Administrator No. Input

• Set an ID number for opening the “Administrator Mode” screen of Utility Mode from the

10-Key Pad.

1. Press the Start key to alternately display the current administrator number.

2. Press the Clear key to clear the current administrator number.

3. Enter the new administrator number from the 10-Key Pad. The number should consist

of 6 digits, ranging from 000000 to 999999.

4. Press the Start key to validate the new administrator number just entered.

(9) Change Fixed Zoom

• Change a fixed zoom ratio to a desired value.

✽

The ratios of 50 %, 100 %, and 200 % cannot be changed.

1. Press the Start key to display the fixed zoom ratio.

2. Press the Zoom key to select the specific zoom ratio to be changed.

3. Press the Clear key to clear the zoom ratio selected.

4. Enter the new zoom ratio from the 10-Key Pad.

5. Press the Start key to validate the new zoom ratio just entered.

If any value outside the allowable setting range is entered, the Display shows “Err”

rejecting the entry. (The old zoom ratio will reappear on the Display 1 sec. later.)

(10) Marketing Area Setting

• Set the marketing area.

1. Press the Start key to display the current marketing area setting.

2. Press the Clear key to clear the current marketing area setting value.

3. Enter the new setting value from the 10-Key Pad.

4. Press the Start key to validate the setting value just entered.

If any value outside the available setting range is entered, the Display shows “Err”

rejecting the entry. (The old setting value will reappear on the Display 1 sec. later.)

Setting Description

0MSJ

1MC

2ME

3 China

4 Other areas

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 181 182

Pas de commentaire

Minolta Di183 Manuel de service Page 110