Minolta Di183 Manuel de service télécharger pdf (Page 139)

FrameMaker Ver.5.5E(PC) Di152/Di183 TROUBLESHOOTING

01.09.04

T-19

Code Description Detection Timing

C0650 Faulty Scanner Home

Position Sensor

• The Scanner Home Position Sensor (PC6) does not

go from HIGH to LOW when the Scanner Motor (M5)

is energized for a given number of steps after the

sequence to bring the Scanner back to its home posi-

tion has been started at the end of a scan motion and

during re-shading.

• The Scanner Home Position Sensor (PC6) does not

go from LOW to HIGH when the Scanner Motor (M5)

is energized for a given number of steps after a scan

motion has been started at the end of a Scanner

Home Position Sensor home check scan motion and

during re-shading.

C0B60 Bin Switching Motor

malfunction

If the Upper Home Position Sensor is LOW during an ini-

tial operation:

• The Lower Home Position Sensor (PC33) is LOW

when the Bin Switching Motor (M1) starts turning for-

ward.

• If the Lower Home Position Sensor (PC33) does not

go LOW at a time 2.5 sec. after the Bin Switching

Motor (M1) has started turning forward, the Bin

Switching Motor is kept deenergized for a given

period of time and then energized again to turn back-

ward. The Upper Home Position Sensor (PC32) does

not go LOW after the motor has started turning back-

ward.

• The Upper Home Position Sensor (PC32) does not go

HIGH at a time 1 sec. after the Bin Switching Motor

(M1) has started turning forward.

• When the Lower Home Position Sensor (PC33) goes

LOW, the Bin Switching Motor (M1) starts turning

backward. The Upper Home Position Sensor (PC32)

does not go LOW at a time 2.5 sec. after the motor

has started turning backward.

• When the Lower Home Position Sensor (PC33) goes

LOW, the Bin Switching Motor (M1) starts turning

backward. The Lower Home Position Sensor (PC33)

does not go HIGH at a time 1 sec. after the motor has

started turning backward.

If the Lower Home Position Sensor is LOW during an ini-

tial operation:

• The Upper Home Position Sensor (PC32) does not go

LOW at a time 2.5 sec. after the Bin Switching Motor

(M1) has started turning backward.

• The Lower Home Position Sensor (PC33) does not go

HIGH at a time 1 sec. after the Bin Switching Motor

(M1) has started turning backward.

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 181 182

Commentaires sur ces manuels

Pas de commentaire

Minolta Di183 Manuel de service Page 139

Commentaires sur ces manuels

Produits connexes et manuels pour Multifonctionnels Minolta Di183