Minolta Di183 Manuel de service télécharger pdf (Page 9)

FrameMaker Ver.5.5E(PC) PL/PS Standard Document Ver.03

01.04.23

P-7

4. Precautions for Dis/Reassembly

• Be sure to unplug the copier from the outlet before attempting to service the copier.

• The basic rule is not to operate the copier anytime during disassembly. If it is absolutely

necessary to run the copier with its covers removed, use care not to allow your clothing to

be caught in revolving parts such as the timing belt and gears.

• Before attempting to replace parts and unplug connectors, make sure that the power

cord of the copier has been unplugged from the wall outlet.

• Be sure to use the Interlock Switch Actuating Jig whenever it is necessary to actuate the

Interlock Switch with the covers left open or removed.

• While the product is energized, do not unplug or plug connectors into the circuit boards

or harnesses.

• Never use flammable sprays near the copier.

• A used battery should be disposed of according to the local regulations and never be dis-

carded casually or left unattended at the user’s premises.

• When reassembling parts, make sure that the correct screws (size, type) and toothed

washer are used in the correct places.

5. Precautions for Circuit Inspection

• Never create a closed circuit across connector pins except those specified in the text and

on the printed circuit.

• When creating a closed circuit and measuring a voltage across connector pins specified

in the text, be sure to use the GND wire.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 181 182

Pas de commentaire

Minolta Di183 Manuel de service Page 9