Minolta Di183 Manuel de service télécharger pdf (Page 5)

FrameMaker Ver.5.5E(PC) PL/PS Standard Document Ver.03

01.04.23

P-3

11. Restore all parts and harnesses to their original positions.

1-2. Caution

1. Precautions for Service Jobs.

2. Precautions for Servicing with Covers and Parts Removed.

• To promote safety and prevent product damage, make sure the harnesses are

returned to their original positions and properly secured in their clamps and sad-

dles in order to avoid hot parts, high-voltage parts, sharp edges, or being

crushed.

• To promote safety, make sure that all tubing and other insulating materials are

returned to their original positions. Make sure that floating components mounted

on the circuit boards are at their correct distance and position off the boards.

CAUTION

• A toothed washer and spring washer, if used originally, must be reinstalled.

Omitting them may result in contact failure which could cause an electric shock

or fire.

• When reassembling parts, make sure that the correct screws (size, type) are

used in the correct places. Using the wrong screw could lead to stripped

threads, poorly secured parts, poor insulating or grounding, and result in a mal-

function, electric shock or injury.

• Take great care to avoid personal injury from possible burrs and sharp edges on

the parts, frames and chassis of the product.

• When moving the product or removing an option, use care not to injure your

back or allow your hands to be caught in mechanisms.

• Wherever feasible, keep all parts and covers mounted when energizing the

product.

• If energizing the product with a cover removed is absolutely unavoidable, do not

touch any exposed live parts and use care not to allow your clothing to be

caught in the moving parts. Never leave a product in this condition unattended.

• Never place disassembled parts or a container of liquid on the product. Parts

falling into, or the liquid spilling inside, the mechanism could result in an electric

shock or fire.

• Never use a flammable spray near the product. This could result in a fire.

• Make sure the power cord is unplugged before removing or installing circuit

boards or plugging in or unplugging connectors.

• Always use the interlock switch actuating jig to actuate an interlock switch when

a cover is opened or removed. The use of folded paper or some other object

may damage the interlock switch mechanism, possibly resulting in an electric

shock, injury or blindness.

1 2 3 4 5 6 7 8 9 10 ... 181 182

Pas de commentaire

Minolta Di183 Manuel de service Page 5